Transport processes of hydrated ions at polymer/oxide/metal interfaces: Part 1. Transport at interfaces of polymer coated oxide covered iron and zinc substrates
By Posner, R.; Wapner, K.; Stratmann, M. & Grundmeier, G.
Published in Electrochimica Acta
2009
Abstract
Localised electrochemical and spectroscopic techniques were jointly applied for the evaluation of hydrated ion transport processes along polymer/oxide/metal interfaces. In situ Scanning Kelvin Probe (SKP) studies of the local interfacial potentials of organically coated oxide covered zinc and iron substrates were performed in humid nitrogen atmospheres. They were supported by ex situ small spot X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectroscopy (ToF-SIMS) analysis of the interfacial ion distribution. Based on the experimental results it is concluded that also in atmospheres of strongly reduced oxygen partial pressure at which no corrosive delamination takes place, a negatively charged layer of adsorbed hydroxide ions determines ion transport processes along interfaces between polymer films and oxide covered metals. No ion transport was observed for zinc substrates while hydrated cations were selectively transported along the polymer/iron interface. The reduction of oxygen molecules on the highly reactive iron oxide surface is assumed to be responsible for the generation of adsorbed interfacial hydroxide ions. On the other hand such oxygen reduction induced hydroxide formation in humid nitrogen atmospheres with strongly reduced oxygen partial pressure does not seem to take place on oxide covered zinc. The variation of free volumes at the polymer/substrate interface did not lead to a principal change of this phenomenon.