Oxidation resistance and electrical properties of anodically electrodeposited Mn–Co oxide coatings for solid oxide fuel cell interconnect applications
By Wei, Weifeng; Chen, Weixing & Ivey, Douglas G.
Published in Journal of Power Sources
2009
Abstract
Co-rich and crack-free Mn–Co oxide coatings were deposited on AISI 430 substrates by anodic electrodeposition from aqueous solutions. The as-deposited Mn–Co oxide coatings, with nano-scale fibrous morphology and a metastable rock salt-type structure, evolved into a (Cr,Mn,Co)3O4 spinel layer due to the outward diffusion of Cr from the AISI 430 substrates when pretreated in air. The Mn–Co oxide coatings were reduced into metallic Co and Mn3O4 phases when annealed in a reducing atmosphere of 5% H2–95% N2. In contrast to the degraded oxidation resistance and electrical properties observed for the air-pretreated Mn–Co oxide coated samples, the H2-pretreated Mn–Co oxide coatings not only acted as a protective barrier to reduce the Cr outward diffusion, but also improved the electrical performance of the steel interconnects. The improvement in electronic conductivity can be ascribed to the higher electronic conductivity of the Co-rich spinel layer and better adhesion of the scale to the steel substrate, thereby eliminating scale spallation.