Atomic aluminum content (x) effect on fretting-corrosion of Ti1?xAlxN coatings for orthopedic applications
By A. Esguerra-Arce and S. Mischler and S. Moya and C. Amaya and L. Ipaz and L. Yate and J. Meza and Y. Aguilar
Published in Wear
2016
Abstract
Normal micro-movements at the bone-implant interface originate fretting-corrosion processes, thus releasing wear debris from the bone and metallic devices and compromising the fixability of the implant. Titanium aluminum nitride (Ti1?xAlxN) coatings have been considered to overcome these drawbacks and the effect of aluminum content on the fretting-corrosion resistance against bone in a simulated body fluid has been studied. Coatings were synthesized by magnetron co-sputtering by varying the power applied to the aluminum target. Morphology and chemical composition were studied by optical profilometry, \SEM\ and XPS. Coatings with x=0.39, 0.47, 0.61 and 0.69 were obtained. Mechanical properties, adherence and corrosion behavior were assessed by nanoindentation, scratch test and potentiodynamic curves, respectively. The fretting-corrosion behavior was assessed at open circuit potential (OCP) using a tribo-electrochemical apparatus, bone-pins as the counterpart and Hank?s solution as the simulated body fluid. It was found that the fretting-corrosion against bone in the simulated body fluid can damage the metal and coatings, thereby accelerating wear and increasing the current corrosion densities. Coatings with x=0.39, 0.47 and 0.61 are able to protect 304SS against fretting corrosion. The behavior of wear volume with aluminum content in coatings is related to the corrosion resistance and hardness to elastic modulus ratio.