Enhanced Coulombic efficiency and power density of air-cathode microbial fuel cells with an improved cell configuration
By Fan, Yanzhen; Hu, Hongqiang & Liu, Hong
Published in Journal of Power Sources
2007
Abstract
Single chamber air-cathode microbial fuel cells (MFCs) that lack a proton exchange membrane (PEM) hold a great promise for many practical applications due to their low operational cost, simple configuration and relative high power density. One of the great challenges for PEM-less MFC is that the Coulombic efficiency is much lower than those containing PEM. In this study, single-chamber PEM-less MFCs were adapted by applying a J-Cloth layer on the water-facing side of air cathode. Due to the significant reduction of oxygen diffusion by the J-Cloth, the MFCs with two-layers of J-Cloth demonstrated an over 100% increase in Coulombic efficiency in comparison with those without J-Cloth (71% versus 35%) at the same current density of 0.6 mA cm-2. A new cell configuration, cloth electrode assembly (CEA), therefore, was designed by sandwiching the cloth between the anode and the cathode. Such an MFC configuration greatly reduced the internal resistance, resulting in a power density of 627 W m-3 when operated in fed-batch mode and 1010 W m-3 in continuous-flow mode, which is the highest reported power density for MFCs and more than 15 times higher than those reported for air-cathode MFCs using similar electrode materials. This study indicates that the Coulombic efficiency and power density of air-cathode MFCs can be improved significantly using an inexpensive cloth layer, which greatly increases the feasibility for the practical applications of MFCs.