Electrochemical studies on the performance characteristics of solid metal–metal oxide reference sensor for concrete environments
By Muralidharan, Srinivasan; Ha, Tae-Hyun; Bae, Jeong-Hyo; Ha, Yoon-Cheol; Lee, Hyun-Goo; Park, Kyung-Wha & Kim, Dae-Kyeong
|
2006 |
Nano-structured Pt–Cr anode catalyst over carbon support, for direct methanol fuel cell
By Choi, Jae-Sik; Chung, Won Seob; Ha, Heung Yong; Lim, Tae-Hoon; Oh, In-Hwan; Hong, Seong-Ahn & Lee, Ho-In
|
2006 |
Production of capacitive films from Mn thin films: Effects of current density and film thickness
By Djurfors, B.; Broughton, J.N; Brett, M.J. & Ivey, D.G.
|
2006 |
Effect of pore size and surface area of carbide derived carbons on specific capacitance
By Chmiola, J.; Yushin, G.; Dash, R. & Gogotsi, Y.
|
2006 |
Performance of miniaturized direct methanol fuel cell (DMFC) devices using micropump for fuel delivery
By Zhang, Tao & Wang, Qing-Ming
|
2006 |
Model based PEM fuel cell state-of-health monitoring via ac impedance measurements
By Fouquet, N.; Doulet, C.; Nouillant, C.; Dauphin-Tanguy, G. & Ould-Bouamama, B.
|
2006 |
Discharge behavior of lithium/sulfur cell with TEGDME based electrolyte at low temperature
By Ryu, Ho-Suk; Ahn, Hyo-Jun; Kim, Ki-Won; Ahn, Jou-Hyun; Cho, Kwon-Koo; Nam, Tae-Hyun; Kim, Jong-Uk & Cho, Gyu-Bong
|
2006 |
Improved electrochemical properties of a coin cell using LiMn₁.₅Ni₀.₅O₄ as cathode in the 5 V range
By Singhal, Rahul; Das, Suprem R.; Oviedo, Osbert; Tomar, Maharaj S. & Katiyar, Ram S.
|
2006 |
Proton conductivity and chemical stability of Li₂SO₄ based electrolyte in a H₂S–air fuel cell
By Li, Jinxia; Luo, Jing-Li; Chuang, Karl T. & Sanger, Alan R.
|
2006 |
Maleic acid grafted low density polyethylene for thermally sprayable anticorrosive coatings
By Singh, S.K.; Tambe, S.P.; Samui, A.B.; Raja, V.S. & Kumar, Dhirendra
|
2006 |
