Tracking Electrochemically Active Biofilms Using an EQCM Webinar was aired live on April 16, 2020 hosted by Gamry Instruments and presented by Dr. Jerome Babauta.
Download this presentation in PDF Format.
We have prepared this series of videos to assist you in getting accurate results and the best possible performance from your Gamry Electrochemical Measuring Instrument. You can also visit our Application Notes and our Technical Support Resources for additional assistance.
Tracking Electrochemically Active Biofilms Using an EQCM Webinar was aired live on April 16, 2020 hosted by Gamry Instruments and presented by Dr. Jerome Babauta.
Download this presentation in PDF Format.
Basics of EIS Webinar was presented live on March 26, 2020 hosted by Gamry Instruments and presented by Dr. Jacob Ketter.
Download this presentation in PDF Format.
This video shows how to Analyze a Cyclic voltammogram using Gamry’s Echem Analyst. Finding Peaks and Integrating.
A Live Demonstration Calculating Corrosion Rates with LPR and EIS presented 8/6/2020 and presented by Andrew McCaskill.
Download this presentation in PDF Format.
The Interface 5000 designed for cell-level testing monitors half cell & whole cell V in an experiment
Kolibrik.net develops laboratory measuring instruments as well as industrial solutions for science, research and applications.
High Voltage EIS Test System for batteries, fuel cells and electrolyzers. Kikusui PXB with Gamry's LPI1010
At Gamry we wanted to help solve the dilemma of only offering the complete course. We have updated our Course in Electrocehmistry that if you do not want to run a full semester course, you can select as few as one experiment kit at a time.
Advanced Ionomer Materials for Electrochemical Separations Webinar July 11, 2024. Hosted by Gamry, Presented by Dr. Chris Arges, Research Engineer, CASE Senior Scientist Affiliate, Argonne National Laboratory
Unique Multichannel EIS Measurement for Battery Packs Webinar June 19, 2024. Hosted by Gamry, Sponsored by Kolibrik.net and Presented by Pinflow Energy Storage.
Bruker Webinar from May 2023 featuring Gamry's Jacob Ketter's presentation on EIS. This webinar will introduce you to the combined analysis technique used in applied R&D to optimize battery performance, reduce costs and accelerate the path towards a cleaner energy future.
A Live Talk “Non-equilibrium Chemical and Biological Systems with Electrochemical Control" presented on February 24, 2022 hosted by Gamry Instruments and presented by Chong Liu, Assistant Professor in the Department of Chemistry & Biochemsitry at UCLA.
A Live Talk “Probing Redox and Swelling Properties in Electroactive Polymers” presented on June 10, 2021 hosted by Gamry Instruments and presented by Dr. Anna Österholm, Senior Research Scientist at GA Tech.
A Live Talk “Corrosion Resistance of Metals for Orthopedic Implants in Simulated Synovial Fluids under Inflammatory Conditions” presented on May 20, 2021 hosted by Gamry Instruments and presented by Simona Radice, PhD, Research Engineer - Rush University Medical Center
A Live Talk Electrochemistry with Model Thin Film Polymer Electrolytes presented on April 29th, 2021 hosted by Gamry Instruments and presented by Dr. Chris Arges, Assistant Professor in Chemical Engineering at LSU Baton Rouge.
Download the Presentation in PDF
Live Webinar from Bruker and Gamry Spectroelectrochemistry: More than just the sum of its parts presented February 9, 2021 by Dr. Sergey Shilov, Bruker Optics and Dr. David Loveday, Gamry Instruments
A Live Talk Electrochemistry for Sensors and Energy presented on December 2nd, 2020 hosted by Gamry Instruments and presented by Ariel L. Furst, Assistant Professor of Chemical Engineering at MIT.
A Live Talk EIS at a Rotating Disk Electrode presented on October 22nd, 2020 hosted by Gamry Instruments and presented by
Dr. Jerome Babauta.
Download this presentation in PDF Format.
A Live Demonstration A Tafel Experiment - Calculating Tafel Constants presented on August 20th, 2020 hosted by Gamry Instruments and presented by Andrew McCaskill.
A PDF Download of this presentation will be available soon!
EIS of Difficult Samples Webinar was presented live on July 23rd, 2020 hosted by Gamry Instruments and presented by Dr. Jacob Ketter.
Download this presentation in PDF Format.
Cyclic Voltammetry of Biofilms Webinar was presented live on July 9th, 2020 hosted by Gamry Instruments and presented by Dr. Jerome Babauta .
In this webinar, we will have presentations from both Dr. Madeline Dukes from Protochips and Dr. Dave Loveday from Gamry Instruments who will share their knowledge and expertise in fundamental electrochemical measurements and how they can be used for operando observations at the nanoscale that will accelerate research for fuel cell catalysts, batteries, and corrosion.
Introduction to Electrochemistry and its Integration to In Situ TEM. Presented on June 25th. Hosted by Gamry Instruments & Protochips and presented by Dr. David Loveday from Gamry and Dr. Madeline Dukes from Protochips.
A Live Gamry Instruments' Demonstration was presented on June 11th, 2020 hosted by Gamry Instruments and presented by Andrew McCaskill.
Battery Testing Techniques Webinar was presented live on June 4th, 2020 hosted by Gamry Instruments and presented by Dr. David Loveday.
Download this presentation in PDF Format.
Understanding Potentiostat Specifications Webinar was presented live on May 21st, 2020 hosted by Gamry Instruments and presented by Dr. Chris Beasley.
Download this presentation in PDF Format.
Potentiostat Fundamentals Webinar was presented live on May 14th, 2020 hosted by Gamry Instruments and presented by Dr. Chris Beasley.
Download this presentation in PDF Format.
Electrochemical Corrosion Rate Measurement Webinar was presented live on May 7th, 2020 hosted by Gamry Instruments and presented by Dr. David Loveday
Download this presentation in PDF Format.
EIS Low Z Systems Webinar was presented live on April 30th, 2020 hosted by Gamry Instruments and presented by Dr. Jacob Ketter.
Download this presentation in PDF Format.
EIS of Coatings & Corrosion Webinar was aired live on April 9, 2020 hosted by Gamry Instruments and presented by Dr. Jacob Ketter.
Download this presentation in PDF Format.
This video is a demonstation of unboxing the Kolibrik Potentiostat PTC-05100EW, a ±5 V, ±100 A, Water Cooled potentiostat.
Gamry's IMX8 is an Electrochemical Multiplexer designed to expand the capabilities of your potentiostat.
High Voltage EIS Test System for Batteries, Fuel Cells and Electrolyzers
Intro to the EIS (Ice) Box an 8 ch device measures impedance on batteries, fuel cells, super caps
Unboxing the Reference 620 Potentiostat. This Demo shows you everything you will receive.
The Universal Battery Holder™ allows connection of a large variety of batteries, from coin-sized to larger cylindrical shapes (up to 26650), to Gamry Instruments’ potentiostats.
QCM-D, a Quartz Crystal Microbalance with Dissipation, the QCM-I Mini with Impedance is a high-sensitivity mass sensor which measures the change in frequency and dissipation of a quartz crystal resonator and any adsorbed film.
Quartz Crystal Microbalance (QCM) the new eQCM-i Mini electrochemical QCM with dissipation monitoring - QCM-D. Thie eQCM-i QCM allows you to make three electrode measurements in a flow cell.
A Gamry Instruments Demonstration Video: Assembling the MultiPort Corrosion Cell Kit
Gamry Demonstration Video Using two Interface Potentiostats to create a BiPotentiostat
Create a BiPotentiostat with 2 Gamry Reference 600+ Potentiostats
This demonstration video shows you how to calibrate your Gamry Potentiostat
An introduction to Gamry's Screen Printed Electrodes and Screen Printed Electrode Stands
Gamry's SPEs come in groups of 4 and need to be snapped apart to be used individually.
Hooking up a Reference 3000 with a 30k Booster for High-current Pulses for Battery Research
Using the Auxiliary Electrometer with 8 add'l voltage measurement channels each measures any 5-v range in compliance range
Calibrating the Gamry Reference 3000 Auxiliary Electrometer's 8 additional voltage measurement channels.
Assembling the Gamry Quartz Crystal Microbalance Cell for Static Cell and Flow Cell.
Andrew demonstrates the Dr. Bob's Electrochemical Cell Kit
A quick look at how to merge .DTA files to create a unified curve for subsequent analysis. Note that file merging only works with .DTA files that can be overlaid using the "file overlay" feature. In this video, we demonstrate the process with several EIS .DTA files.
The new EA2 includes:
Multi-Language - currently English, Chinese, Japanese, German and Spanish
Period Or Comma delimited numbers
Batch Fitting
This video walks you through the easy process of exporting XY data as text to your own program from Gamry's New Echem Analyst 2.
This function could be useful helping to determine what model to use for equivalent circuit fitting.
Introduction to some key features of Gamry Instruments Software and EIS
Total Harmonic Distortion
Drift Correction
Distribution of Relaxation Times
A short video describing how to use the Autofit routine for fitting EIS data, available in Version 6 (or greater) of our Echem Analyst software.
This video walks you through the easy process of exporting XY data as text or to export the chart. Though the video discusses EIS data, the steps outlined here also apply to exporting data acquired using other techniques.
This video is meant to show QCM users how to find the resonant frequencies of a quartz crystal using Gamry Resonator Software.
This video is meant to show users how to find the resonant frequencies of a polybithiophene-loaded crystal using Gamry Resonator Software.
Electrochemical Impedance Spectroscopy of Lithium ion Battery Demonstration of Gamry's Autofit routine fitting 17 free parameters.
This video shows how to utilize the QCM to operate in air.
This video shows how to get all the extension files stored in the Gamry dala File (Default file to store all the experiment data)
A short video to get you started using the Sequence Wizard.
A short video to get you started using the Sequence Wizard.
A short video to get you started using the Sequence Wizard.
A short video to get you started using the Sequence Wizard.
Presentation of an introduction to Electrochemical Impedance Spectroscopy (EIS) theory and has been kept as free from mathematics and electrical theory as possible.
This presentation answers questions like - "What is a Potentiostat?", "What is Potential?", "What is Current?"
How to Run an EIS Quick Check: Accuracy and System Limits - Checking your potentiostat and understanding the systems' limits. EIS Accuracy Contour Plot vs. Quick Check - Cable Setup Matters
What makes the Interface™ 1010 series potentiostat a Gamry.